Fuel Control: Notes
WARNING: This page is about a different car, the 1998 Porsche 911 and 1997 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect ECM. ECM is located under driver's seat. Connect a fused jumper wire between DME relay ground terminal No. 3 (Black/White wire) and ground terminal No. 24 (Brown wire). See Figure.
- Turn ignition on. Ensure fuel pump runs. If fuel pump does not run, check fuses, DME relay, Black/White wire to DME relay, Green/Black wire to fuel pump and fuel pump.