LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 2002 >> Boxster Base, Automatic >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Passenger Protection >> Removing and installing sensor for side airbag >> Install sensor for side airbag
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Install sensor for side airbag

  1. Position sensor and secure with the fastening screws. Tightening torque 10 Nm (7.5 ftlb.).
    Fig 1: Positioning Side Airbag Sensor And Secure With Fastening Screws
    G03155389Courtesy of PORSCHE OF NORTH AMERICA, INC.
  2. Connect electrical plug connection.
    Fig 2: Connecting Side Airbag Sensor Electrical Plug Connection
    G03155390Courtesy of PORSCHE OF NORTH AMERICA, INC.
  3. Position the support and engage in lower side member.
    Fig 3: Positioning Support And Engage In Lower Side Member
    G03155391Courtesy of PORSCHE OF NORTH AMERICA, INC.
  4. Push in the locating peg -1-  of the support and check that it is sitting correctly.
  5. Tighten the fastening nuts -3-  and the fastening screws -2-  . Tightening torque -2-  7.2 Nm (5.5 ftlb.).
    6. Fig 4: Pushing In Locating Peg Of Support & Tightening Nuts & Screws
    G03155392Courtesy of PORSCHE OF NORTH AMERICA, INC.
  6. Lay the floor covering over the support and engage.
scientia non olet · About LEMON Manuals