LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 2003 >> Boxster Base, Automatic >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Differential, Transaxle System >> Removing And Installing Long Flanged Shaft >> Installing
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removing And Installing Long Flanged Shaft: Installing

  1. Replace square sealing ring in mounting saddle.
  2. Check flanged shaft for burrs and sharp edges on the transmission end of the shaft (arrow) and deburr if necessary.
    Fig 1: Checking Flanged Shaft For Burrs And Sharp Edges On Transmission End
    G03102805Courtesy of PORSCHE OF NORTH AMERICA, INC.
  3. Carefully insert flanged shaft into the transmission.
    NOTE: While being inserted, the flanged shaft must be carefully guided with the hand in order to prevent damage to the double sealing ring in the transmission.
  4. Refill rear-axle oil.
scientia non olet · About LEMON Manuals