LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 2004 >> Boxster Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission, Controls, Case >> Removing And Installing Deflection Lever >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removing And Installing Deflection Lever: Installation

  1. Lubricate deflection lever axle and bushings with Optimoly TA (available from Porsche Parts Service).
  2. Install deflection level and fit snap ring.
  3. Clip in push rod and press selector lever cable onto axle of the deflection lever as far as it will go.
  4. Check adjustment of the selector lever cable. See ADJUSTING SELECTOR LEVER CABLE  .
scientia non olet · About LEMON Manuals