Fault code 1316: Diagnosis/troubleshooting
NOTE:
If there is no incoming signal/message via the CAN drive when using several control units, the CAN drive must be checked for open or short circuits. Refer to 'CHECKING INSTRUCTIONS/CAN DATA BUS
'.
DIAGNOSIS TROUBLESHOOTING PROCEDURE
| Work instruction | Display OK | If not OK | |
|---|---|---|---|
| 1 | Read out fault memory for PSM control unit (fault localization) | To eliminate further faults, please follow the diagnosis/troubleshooting instructions for the PSM control unit, refer to the ANTI-LOCK BRAKE SYSTEM (ABS)
article
. → End |
|
| 2 | CHECKING INSTRUCTIONS/CAN DATA BUS . | → End | |