Fault status
The following status types are possible:
- present
- not present
This information should be saved using the Save key [F4] and printed out.
NOTE:
Visual inspection: During troubleshooting, please check first that the affected pins on the level control module plug connection are neither damaged nor corroded. The wiring and plugs of the affected components must also be checked for external damage and correct contacts. Repair damaged or corroded pins if possible, otherwise replace affected pins. Repair or replace damaged wires.
NOTE:
Battery voltage and signals: A battery voltage of between 11.4 and 14.5 V is required for troubleshooting. This must be checked and provided if necessary. Both signals and voltages as well as components or fuses (input side) must be guaranteed on the vehicle electrical system.
NOTE:
Specified resistance values are based on an ambient temperature of 20°C.