Specifications Index
CAYENNE (9PA) SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | Technical data | ||
| Torque | Tightening torques | ||
| Axle Nut/Hub Nut | |||
| Front | 370 (500 N.m) | ||
| Rear | 370 (500 N.m) | ||
| Battery | |||
| as of MY 2003 (Cayenne S TIP, Cayenne S MAN, Cayenne Turbo) | Battery load test | ||
| as of MY 2004 (Cayenne TIP, Cayenne MAN) | Battery load test | ||
| Brakes | |||
| Bleeding Sequence | |||
| HYDRAULICS | 47 01 07 Bleeding the brake system - as of MY 2003 (All Models Except Cayenne S TIO Titan) | ||
| Disc | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | DISC BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | N/A | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drive Belts | |||
| Adjustment | |||
| Belt Routing | |||
| Cayenne S TIP, Cayenne S MAN, Cayenne Turbo, Cayenne Turbo S | See fig. 114 in Installing coolant pump | ||
| Cayenne TIP, Cayenne MAN | See fig. 194 in Installing drive belt | ||
| Cayenne S TIP, Cayenne S MAN | See fig. 204 in Installing drive belt - Cayenne S | ||
| Cayenne Titanium | See fig. 230 in Installing drive belt - Cayenne Turbo | ||
| Cayenne Turbo, Cayenne Turbo S | See fig. 246 in Installing drive belt - Cayenne Turbo | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | approx. 1.5 | ||
| Thermostat R & I | |||
| Water Pump R & I | |||
| Engine Mechanical | |||
| Compression | |||
| 2003-2006 |
8-cylinder 6-cylinder |
||
| 2008 - 2010 |
Cayenne 3.0-litre diesel engine Cayenne V6 3.6 l DFI engine Cayenne V8 4.8-litre DFI naturally aspirated and turbo engines |
||
| Oil Pressure | |||
| 2003-2006 | Oil pressure at n = 5000 rpm; Approx. 4.5 bar at 90 °C | ||
| 2008-2010 | Oil pressure at n = 5000 rpm; at approx. 90 °C (194 °F) 4.5 bar (65.27 psi) | ||
| Overhaul |
|
||
| Torque |
|
||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | |||
| Drive plate to crankshaft Cayenne (engine type BFD) - as of MY 2004 (Cayenne TIP, Cayenne MAN) |
44 + 180° | ||
| Drive plate to crankshaft Cayenne S (M48/00) and Cayenne Turbo (M48/50) - as of MY 2003 (Cayenne S TIP, Cayenne S MAN) |
60 (44) + 90° (always replace screws with new ones!) | ||
| Fuel System | |||
| Pressure Specification | 4.0 ± 0.2 bar at idle speed | ||
| Fuel Pressure Test Procedure | |||
| Fuel Filter Location | Located in the fuel tank | ||
| Fuel Filter R & I | 20 60 19 Removing and installing fuel filter - as of MY 2003 (All Models) | ||
| Ignition | |||
| Firing Order | |||
| Cayenne V6 3.6 l DFI engine | 1-5-3-6-2-4 | ||
| V8 4.8-litre DFI naturally aspirated and turbo engines | 1-3-7-2-6-5-4-8 | ||
| Ignition Wires (Resistance) | Coil On Plug | ||
| Ignition Wires (Routing) | Coil On Plug | ||
| Spark Plug | |||
| Gap | |||
| 2004 - 2006 | 0.9 - 0.1 mm | ||
| 2008 - 2010 | CAYENNE TIP, CAYENNE MAN 0.9 mm (0.035 in) |
||
| 2008 - 2010 | CAYENNE S TIP, CAYENNE S MAN, CAYENNE GTS TIP, CAYENNE GTS MAN, CAYENNE S TRANSSYBERIA TIP, CAYENNE S TRANSSYBERIA MAN, CAYENNE GTS TIP "PORSCHE DESIGN EDITION 3" 1.6 mm (0.063 in) |
||
| 2008 - 2010 | CAYENNE TURBO, CAYENNE TURBO, CAYENNE TURBO S 0.8 mm (0.031 in) |
||
| 2009-2010 | CAYENNE DIESEL Map-controlled |
||
| Torque | |||
| 2003-2006 |
|
||
| 2008-2010 |
|
||
| Starting | |||
| Starter | |||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | |||
| Torque | |||
| Front | TORQUE SPECIFICATIONS | ||
| Rear | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 118 (160 N.m) | ||