LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 2010 >> Cayenne S >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> 20 - Fuel Supply, Control >> WM 201519 Removing And Installing Fuel Level Sensor On DFI Engines >> Subsequent Work >> Notes
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Subsequent Work: Notes

  1. Fit new seal in the opening of the tank.
    Fig 1: Installing Seal For Opening Of Tank
    G09409822Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Connect connecting flange. Connect the electric connectors for the fuel level sensor and fuel pump. Then push on the fuel lines. The connectors must lock with an audible click.
    Fig 2: Identifying Connecting Flange
    G09409823Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    Fig 3: Identifying Left And Right Connection Unit
    G09409824Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. Right connection unit with pressure regulator
    2. Left connection unit with fuel filter
  3. Fit connecting flange into the opening of the tank. When doing so, make sure that the plastic lug is pointing forwards.
scientia non olet · About LEMON Manuals