October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Coding Control Unit For Distance Measuring Sensor Automatically
- Select the Codings/adaptations
tab. Press F12 to continue.
- Automatic coding
must now be selected. Press F12 to continue.
- Wait for confirmation that coding was completed successfully
. Press F12 to continue.
- Exit the diagnostic application.
- Switch off ignition.
- Disconnect the battery charger from the vehicle.
- Carry out a test drive and read out the fault memory.