LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Porsche >> 2017 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 263 (69 Occupant Protection/Personal Protection -- 92A Cayenne) >> WM 696819 Removing And Installing Occupant Detection Control Unit >> Subsequent Work >> Subsequent Work For Occupant Detection Control Unit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Subsequent Work For Occupant Detection Control Unit

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Porsche Cayenne, 2017 Porsche Cayenne, 2016 Porsche Cayenne, 2015 Porsche Cayenne, and 2014 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install pressure sensor mat. → SECURING COVER FOR FRONT SEAT - section on "Installing"
  2. Install padding for right seat. → SECURING COVER FOR FRONT SEAT - section on "Installing"
  3. Install control unit for memory seat adjustment. → INSTALLING CONTROL UNIT FOR MEMORY SEAT ADJUSTMENT - section on "Installing"
  4. Install right front seat. → INSTALLING FRONT SEAT - section on "Installing"
  5. Connect the battery and carry out work instructions after disconnecting the battery. → 978509 LOOSENING AND SECURING GROUND STRAP FOR BATTERY
  6. If the occupant detection control unit was replaced, the data must be written into the control unit/checked. → 696855 REPLACING OCCUPANT DETECTION CONTROL UNIT