Installing Switch For Front Power Windows

WARNING: This page is about a different car, the 2010 Porsche Cayenne, 2009 Porsche Cayenne, and 2008 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Place power window switch in retaining bracket.
Screw in and tighten fastening screws.

Fig 1: Installing Fastening Screws Of Retaining Bracket
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Insert the electrical plug connection in the power window switch until it clicks into place.

Fig 2: Inserting Electrical Plug Connection On Power Window Switch
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Position the power window switch in the door trim panel and press it in.

Fig 3: Positioning Power Window Switch In Door Trim Panel
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Make sure that the power window switch is positioned evenly on the gap.