Removal & Installation
WARNING: This page is about the 718 Spyder Eng CD MDW.AC, which is a different variant/trim than selected.
Includes: R&I Engine Assembly (where necessary).| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Standard Trans | 6.7 | C | ||
| Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: | ||||
| Standard Trans | 0.8 | C | ||
| Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace: | ||||
| Standard Trans | 0.2 | C | ||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Rear,w/Clutch Removed | 0.5 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| Standard Trans, w/Clutch Removed | 0.3 | C | ||
| Combination Procedure: MAINSHAFT OIL SEAL: Remove & Replace: | ||||
| Standard Trans | 0.5 | B | ||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| Standard Trans | 0.5 | C | ||