LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 1994 >> 900 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Distributor (900 Series) >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

Remove distributor cap with wiring attached. Unplug harness connector from distributor. Remove mounting bolts and distributor. To install, rotate distributor shaft until drive tang aligns with slot on camshaft. Reverse removal procedure to complete installation. Adjust ignition timing. See ADJUSTMENTS article in the ENGINE PERFORMANCE Section.

scientia non olet · About LEMON Manuals