Specifications Index
9000 SPECIFICATIONS INDEX
| System | Specification/Procedure | |
|---|---|---|
| Air Conditioning | ||
| Service | A/C SYSTEM SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Axle Shaft Hub Nut | 207-222 Ft. Lbs. (280-300 Nm) | |
| Battery | BATTERY | |
| Brakes | ||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | |
| Disc Brakes | DISC BRAKE SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Charging | ||
| Generator | TESTING | |
| Torque | NA | |
| Drive Belts | ||
| Adjustment | Tensioner is automatic | |
| Belt Routing | DRIVE BELT ROUTING | |
| Engine Cooling | ||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | |
| Radiator Cap Pressure | 14.5-18.2 psi (100-125 kPa) | |
| Thermostat R& I | THERMOSTAT | |
| Water Pump R & I | COOLANT PUMP | |
| Engine Mechanical | ||
| Compression | ENGINE COMPRESSION | |
| Oil Pressure | Oil pressure is 43 psi (3.0 kg/cm2 ) at 2000 RPM. | |
| Overhaul | ENGINE SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | |
| Flywheel/Flex Plate Torque | 59 Ft. Lbs. (80 Nm) | |
| Fuel System | ||
| Fuel Filter Location | NA | |
| Fuel Filter R & I | NA | |
| Pressure Release Procedure | FUEL SYSTEM PRESSURE RELEASE | |
| Pressure Specifications | 43.5 psi (300 kPa) | |
| Fuel Pressure Test Procedure | FUEL PRESSURE | |
| Ignition | ||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | |
| Ignition Wires (Routing) | NA | |
| Spark Plugs | ||
| Type | NGK BCPR7ES | |
| Gap | 0.039" (1.00mm) | |
| Torque | 21 Ft. Lbs. (28 Nm) | |
| Starting | ||
| Starter | TESTING | |
| Torque | TORQUE SPECIFICATIONS | |
| Wheel Alignment | ||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | |
| Torque | TORQUE SPECIFICATIONS | |
| Wheel & Tire | ||
| Lug Stud Torque | 76-90 Ft. Lbs. (103-122 Nm) | |