Selector Lever
- Check if play in selector lever is the same in position "N" as in position "D". If play is not equal, adjust cable by moving selector lever to Park. Lift up cable adjuster clip. See Fig 1
. Place gearshift selector on gearbox in Park. Roll vehicle until Park interlock locks.
- Press selector lever (inside vehicle) backward and press down adjuster clip so it locks cable ferrule. If there is play in Park (inside vehicle), selector lever must be pressed backward while pressing down clip. Ensure play is equal in positions "N" and "D".
Courtesy of SAAB-SCANIA OF AMERICA, INC.