LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2000 >> 9-3 SE, 4D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - 9-3, 9-5 >> Computerized Engine Controls >> Electronic Control Module (ECM) >> Power Circuit
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Power Circuit

  1. Use DVOM to check for battery voltage at terminal No. 23 (Pink/White wire on 9-3, Red wire on 9-5 Series). If battery voltage exists, go to next step. If battery voltage does not exist, repair open circuit in wire between ECM and fuse (No. 28 on 9-3, No. 17 on 9-5 Series). See appropriate wiring diagram in WIRING DIAGRAMS article.
  2. Turn ignition on. Check for battery voltage between ECM terminal No. 43 (Yellow/Grey wire on 9-3, Blue/Red wire on 9-5 Series) and ground. If battery voltage does not exist, repair open circuit in Blue/Red wire between ECM and fuse located in dashboard fuse block (No. 17 on 9-3, No. 27 on 9-5 Series).
Fig 1: Identifying ECM Terminals (All Models)
G99E52922Courtesy of SAAB-SCANIA OF AMERICA, INC.
scientia non olet · About LEMON Manuals