LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2002 >> 9-5 Linear, 4D Sedan, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Checking For Open Circuits/Short Circuits >> Measuring Resistance To Check For Open Circuits
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Measuring Resistance To Check For Open Circuits

  1. Make sure there is no power being supplied to the component or lead to be checked (e.g. by removing the relevant fuse).
  2. Set the multimeter to ohm measurement and connect the instrument to each end of the component/lead to be checked.
  3. Jiggle the relevant wiring harness while observing the ohmmeter. The resistance for a wiring harness should normally be less than 1 ohm. Special values apply to components.
scientia non olet · About LEMON Manuals