LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2004 >> 9-3 Linear, Standard >> Repair and Diagnosis >> Electrical >> Body Electrical >> Control Module >> Adjustment - Replacement >> Amplifier, front speaker (354F), CV >> To fit
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

To fit

  1. Fit the amplifier into the bracket.
  2. Fit the amplifier retaining screw.
    Fig 1: Illustration For Steps 2, 4 & 5
    G03719115Courtesy of SAAB-SCANIA OF AMERICA, INC.
  3. Fit the assembled amplifier and bracket.
  4. Fit the bracket screws.
    IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION  .
  5. Plug in the connector.
  6. Carry out actions after replacement of control module.
  7. Check the function.
  8. Fit the rear side trim on the left side.
scientia non olet · About LEMON Manuals