LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2005 >> 9-3 Linear, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Disc) >> Removal & Installation >> Abs, TCS & Esp (Anti-Lock Brake, Traction Control Systems & Electronic Stabilizer Program) Unit With Control Module >> Calibration Of Steering Wheel Angle Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Calibration Of Steering Wheel Angle Sensor

WARNING: This page is about a different car, the 2004 Saab 9-5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The steering wheel angle sensor must be calibrated after working on the steering assembly and aligning wheel angles. The wheel alignment must be correct before calibration is carried out.
  1. Put the wheels straight ahead.
  2. Connect Tech 2 and select Programming - Steering wheel angle sensor. Follow the instructions displayed on Tech 2.
  3. Read and clear ESP trouble codes.
  4. Test drive the vehicle.
  5. Check for any DTC's that have been generated. If there are any DTC's present, refer to the respective code for fault diagnosis and procedure.
  6. Disconnect Tech 2.
scientia non olet · About LEMON Manuals