LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2005 >> 9-7X Linear >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 4.2L - Introduction >> Repair Instructions >> Crankshaft Position (CKP) Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    2. Fig 1: View Of Crankshaft Position Sensor
    GM1237427Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the crankshaft position (CKP) sensor harness connector.
  3. Remove the CKP sensor retaining bolt.
  4. Remove the CKP sensor from the engine block.
scientia non olet · About LEMON Manuals