LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2005 >> 9-7X Linear >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 4.2L - Introduction >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

  1. Install the new fuel tank pressure sensor seal.
    2. Fig 1: View Of Fuel Tank Pressure Sensor
    GM1480291Courtesy of GENERAL MOTORS CORP.
  2. Install the fuel tank pressure sensor.
  3. Connect the fuel tank sensor harness connector.
  4. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About LEMON Manuals