LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2005 >> 9-7X Linear >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 4.2L - Introduction >> Repair Instructions >> Intake Air Temperature (IAT) Sensor Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

    Fig 1: Locating Intake Air Temperature Sensor
    GM732048Courtesy of GENERAL MOTORS CORP.
  1. Install the IAT sensor (1) to the air duct with a pushing and twisting motion.
  2. Reconnect the IAT sensor electrical connector.
scientia non olet · About LEMON Manuals