LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2006 >> 9-7X 4.2i >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Traction Control Switch Replacement (Console Mounted) >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

    IMPORTANT: The console shift lever bezel must be removed prior to removing the traction control switch.
  1. Remove the shift lever bezel. Refer to Console Shift Lever Bezel Replacement in Instrument Panel, Gages, and Console.
    2. Fig 1: Traction Control Switch Electrical Connector
    GM1265379Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector (1) from the switch.
    3. Fig 2: Releasing Traction Control Switch Ring Tabs
    GM1265389Courtesy of GENERAL MOTORS CORP.
  3. Use a flat-bladed tool to release the ring tabs (1).
    4. Fig 3: Removing/Installing Traction Control Switch Retaining Ring
    GM1265370Courtesy of GENERAL MOTORS CORP.
  4. Remove the retaining ring from the switch.
    5. Fig 4: Removing/Installing Traction Control Switch
    GM1265375Courtesy of GENERAL MOTORS CORP.
  5. Remove the switch (1) from the trim plate.
scientia non olet · About LEMON Manuals