LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2006 >> 9-7X 4.2i >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Traction Control Switch Replacement (Instrument Panel Mounted) >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: Removing/Installing Traction Control Switch Electrical Connector
    GM651279Courtesy of GENERAL MOTORS CORP.
  1. Position the traction control switch to the trim plate
  2. Install the traction control switch to the instrument panel trim plate by seating the locking tabs.
  3. Connect the electrical connector to the traction control switch.
  4. Install the accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory or Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages, and Console.
scientia non olet · About LEMON Manuals