LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2010 >> 9-5 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Basic Engine, V6 >> Adjustment Replacement >> Engine Mount Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Mount Inspection

  1. Install the engine support fixture engine bridge, retainer frame. Refer to ENGINE SUPPORT FIXTURE (REAR LEFT SIDE)  or ENGINE SUPPORT FIXTURE (REAR RIGHT SIDE) .
  2. Observe the engine mount while raising the engine. Raising the engine removes the weight from the engine mount and creates slight tension on the rubber.
  3. Replace the engine mount if the engine mount exhibits any of the following conditions:
    • The hard rubber is covered with heat check cracks.
    • The rubber is separated from the metal plate of the engine mount.
    • The rubber is split through the center of the engine mount.
  4. For engine mount replacement, refer to one of the following:
scientia non olet · About LEMON Manuals