LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saab >> 2011 >> 9-3X Standard >> Repair and Diagnosis >> Electrical >> Body Electrical >> General Electrical >> Repair Instructions - Control Modules >> Transmission control module, TCM >> To fit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

To fit

  1. Fit the control module.
    Fig 1: Illustration For Steps 1-2
    G05571142Courtesy of SAAB-SCANIA OF AMERICA, INC.
    IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION .
  2. Plug in the connectors.
  3. Fit the battery cooling pipe.
  4. Fit the battery cover.
  5. Perform Procedures after fitting the control module and service programming, if necessary. See Procedure after changing the control module .
  6. If a new control module has been fitted, it must be adapted, see ADAPTATION, RESETTING .
scientia non olet · About LEMON Manuals