To fit

WARNING: This page is about a different car, the 2009 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION .

Plug in the control module connector and fit the clip.

Fig 1: Identifying Control Module Connector
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fit the control module to the steering shaft.

Fig 2: Fitting Control Module To Steering Shaft
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fit the gaiter to the control module.

Fig 3: Fitting Gaiter To Control Module
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Make sure that the wheels are pointing straight ahead. Turn the contact roller so that the pointer is in the middle of the indicator opening.

Fig 4: Locating Marks
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fit the Steering wheel. See STEERING WHEEL .
Carry out changing a control module .