Special Tools
- BO-641 Suction Holder
- BO-46974 Glass Removal System
For equivalent regional tools, refer to SPECIAL TOOLS .
WARNING:
Approved safety glasses and gloves should be worn when performing this procedure to reduce the chance of personal injury.
NOTE:
The following document describes the procedure for removing the windshield using BO-46974
glass removal system. As a supplement to the existing video VT 54, concise steps will be shown for removing the windshield without destroying it. With the introduction of BO-46974
glass removal system, the conventional glass removing methods are no longer used.
Position the vehicle on level ground and move the front wheels to the straight-ahead position.
BO-46974 glass removal system is recommended for removing glass without destroying it. Further information can be found in video VT 54.
Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces.