Connector Repair

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Saturn SW2, 1995 Saturn SW1, 1995 Saturn SL2, 1995 Saturn SL1, and 1995 Saturn SL. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Terminals in SIR system are made of special metal to provide contact integrity for sensitive, low energy circuits. These terminals are only available in Saturn Terminal Repair Kit (SA 9138Z). DO NOT substitute using any other terminals.

If any connector or terminal in SIR wire harness (except pigtails) is damaged, component should be replaced using appropriate Saturn Terminal Repair Kit (SA 9138Z). Terminal Repair Kit contains an instruction sheet and sealed splices which are used to splice new wires, connectors and terminals to wiring harness. A splice crimping tool, which is color-keyed to match splices must be used to apply these splices.

If individual terminals are damaged on SDM or resistor module connectors, repair component using SDM Terminal Repair Kit. If individual terminals are damaged on any other SIR system connection, entire connection should be replaced using appropriate Terminal Repair Kit.