October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Output Shaft Assembly: Disassembly

Using a press, remove the following components in order. See Figure .

Output shaft bearing
3-4 driven gear
2nd driven gear
2nd driven gear bearing
2nd gear synchronizer ring and 1-2 synchronizer sleeve
1-2 synchronizer hub
1st gear synchronizer ring
1st driven gear
1st driven gear bearing
1st driven gear thrust bearing

NOTE: Keep all synchronizer parts together with their original sleeve and hub.