LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 1997 >> SW1 Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Miscellaneous Controls >> Transmission >> Converter Clutch Actuator
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Converter Clutch Actuator

  1. Disconnect transaxle harness connector. Measure resistance across actuator terminals "E" and "K". See Fig 1. Resistance should be 4-6 ohms with fluid temperature at about 68-122°F (20-50°C). If resistance is not as specified, go to next step.
  2. Remove actuator connector plate. Check resistance across actuator terminals. Resistance should be 4-6 ohms with fluid temperature at about 68-122°F (20-50°C). If resistance is not as specified, replace actuator. If resistance was okay, replace actuator connector plate.
Fig 1: Converter Clutch Schematic
G95I12565
scientia non olet · About LEMON Manuals