Removal Procedure

Fig 1: Door Speaker

Courtesy of GENERAL MOTORS COMPANY

Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
Remove the speaker.
Partially remove the water deflector to access the openings in the door structure.

Fig 2: Window & Insulator (Slide Clip) Retention Tabs
Courtesy of GENERAL MOTORS COMPANY
Lower the window to access the window insulator (slide clip) retention tabs. If the regulator has failed in the full up position, lower the window and regulator as an assembly.

Fig 3: Sash & Slide Clips
Courtesy of GENERAL MOTORS COMPANY
Disengage the front slide clip from the sash by depressing the retention tab and sliding the sash (1) forward. Repeat for rear window insulator (slide clip) (2).

Fig 4: Window Regulator
Courtesy of GENERAL MOTORS COMPANY
When the window is disconnected, rotate and remove from the door.