October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Torque Specifications

TORQUE SPECIFICATIONS

Application

Ft. Lbs. (N.m)

Axle Nut

Intial Torque

74-118 Ft. Lbs. (100-160 N.m)

Final Torque

15 Ft. Lbs. (20 N.m) + 90 Degrees

Caliper Mount Bracket-To-Knuckle Bolts

70 (95)

Exhaust Manifold Pipe

To-Exhaust Manifold Nuts

22 (30)

To-Exhaust Pipe Bolts

15 (20)

To-Resonator Bolts

15 (20)

Frame Assembly-To-Body Bolts

66 (89) + 45-60 degrees

Lower Control Arm

Ball Stud-To-Control Arm Bolts/Nuts

25 (34)

To-Frame Bolts

66 (89) + 75-90 degrees

To-Knuckle

75 (102)

Stabilizer Bar

Clamp-To-Frame Bolts

15 (20)

Link-To-Strut Nut

48 (65)

To-Stabilizer Bar Link Nut

48 (65)

Strut Assembly

Strut Rod Nut

40 (54)

To-Body Mounting Nut

40 (54)

To-Knuckle Bolts/Nuts

⁽¹⁾

Suspension Support-To-Body Bolts

66 (89) + 45-60 degrees

Tie Rod End-To-Knuckle Nut

45 (61)

Wheel Lug Nuts

⁽²⁾

INCH Lbs. (N.m)

ABS Sensor

Bracket-To-Knuckle Bolt

71 (8)

To-Bracket Bolt

35 (4)

Exhaust Manifold Pipe Heat Shield Bolts

71 (8)

Oxygen Sensor Clip-To-Underbody Nut

35 (4)

Rotor-To-Hub Screws

27 (3)

⁽¹⁾	Tighten fasteners initially to 37 ft. lbs. (50 N.m), then tighten to final torque of 66 ft. lbs. (90 N.m) plus an additional 45-60 degrees.

⁽²⁾	Hand tighten bolts, then tighten to initial torque of 46 ft. lbs. (63 N.m) in star pattern. In star pattern, tighten to final torque of 92 ft. lbs. (125 N.m).