LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2000 >> LS2 Automatic >> Repair and Diagnosis >> Steering >> Steering Column & Switches >> Removal & Installation >> Ignition Switch >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

Fig 1: Removing & Installing Ignition Switch
GM881945Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors.
  2. Position the ignition switch.
    NOTE: Refer to FASTENER NOTICE .
  3. Install the ignition switch fasteners.

    Tighten 

    Tighten the ignition switch fasteners to 1.5 Nm (13 lb in).

    4. Fig 2: Removing & Installing Steering Column Trim Covers
    GM870643Courtesy of GENERAL MOTORS CORP.
  4. Install the steering column upper trim cover.
  5. Install the lock cylinder bezel.
scientia non olet · About LEMON Manuals