Wiper/Washer Switch
To test wiper/washer switch, check for continuity between wiper/washer switch connector terminals as indicated. See WIPER/WASHER SWITCH TEST
table. Refer to illustration for connector terminal identification. See Figure
.
WIPER/WASHER SWITCH TEST
| Switch Position |
Continuity Between Terminals |
| Front Wiper Switch |
| MIST |
A, B & M; F & K; H & J |
| OFF |
A, B & M; H & J |
| INT |
A, B & M; F & K; H & J |
| LOW |
A, B & M; F & H |
| HIGH |
A, B & M; F & G |
| WASH |
A & B; F & M |
| Intermittent Switch |
| INT1 |
C & D |
| INT2 |
C & D |
| INT3 |
C & D |
| Rear Switch |
| OFF |
A, B & M |
| ON |
A, B & M; E & F |
| WASH |
B, E & F; A & M |