LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2000 >> SL2 Standard, MP2 >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Removal & Installation >> Cruise Control Module >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

  1. Disconnect negative battery cable. Remove Connector Position Assurance (CPA) retainer clip. Disconnect cruise control module harness connector. Disconnect cruise control cable from accelerator pedal by squeezing tabs. See Figure . Remove cruise control module retaining nuts and remove cruise control module.
  2. To install, reverse removal procedure. Tighten cruise control module retaining nuts to 53 INCH lbs. (6 N.m). Adjust cruise control cable. See CRUISE CONTROL CABLE  under ADJUSTMENTS.
scientia non olet · About LEMON Manuals