October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
STOPLAMP Switch: Installation
- Position stoplamp switch to vehicle and install nut. Tighten nut to 89 INCH lbs. (10 N.m).
NOTE:
There is a tab on the stoplamp switch that fits into a slotted hole. This tab keeps the stoplamp switch parallel to the brake pedal. Before tightening the bolt, ensure the plunger is fully depressed with the brake pedal released.
- Connect the stoplamp switch connector. See Fig 1
. Adjust switch. See STOPLAMP SWITCH
under ADJUSTMENTS.
Courtesy of GENERAL MOTORS CORP.