Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Amplifier

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector connectors to the amplifier.
Slide the amplifier onto the clutch pedal bracket.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Position the amplifier to the I/P beam. Install the fasteners.
Tighten: Tighten the fasteners to 10 N.m (89 lb in).