LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2002 >> L100 >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Engine Controls - Removal & Installation) >> Computerized Engine Controls >> Wheel Speed Signal Conditioner Module >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

WARNING: This page is about a different car, the 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.
  1. Wheel speed signal conditioner module is located under left side of Instrument Panel (IP), above the hood release. Turn OFF the ignition. Remove left side lower IP closeout panel (hush panel) attachment fasteners. Remove left side lower IP closeout panel.
  2. Remove left side lower heater duct assembly attachment fastener and remove left side lower heater duct assembly. Remove wheel speed signal conditioner module. The module is an Orange colored component, which is similar to, but slightly larger than a relay. The module should be removed like a relay. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals