Electronic Ignition Module: Installation

WARNING: This page is about a different car, the 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.

Ensure EI module gasket is correctly placed around EI module. Install EI module and EI module attachment bolts. Tighten bolts to specification. See TORQUE SPECIFICATIONS .
Connect EI module harness connector. Push connector until the lock position is felt, then pull back to confirm engagement. Install upper intake manifold. See AIR INDUCTION SYSTEMS .
Connect negative battery cable. Tighten negative battery terminal bolt to specification. Reset all preset radio stations and set clock to correct time.

Fig 1: Removing/Installing EI Module (2.2L)

Courtesy of GENERAL MOTORS CORP.

Fig 2: Removing/Installing EI Module (3.0L)

Courtesy of GENERAL MOTORS CORP.