LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2002 >> SL2 Standard, MP2 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Ignition Systems >> Ignition Control Module >> Removal & Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal & Installation

  1. Disconnect all the harness connectors at the Ignition Control Module (ICM). See Figure or Figure . Note position of spark plug wires for installation. Disconnect spark plug wires from ignition coils. Remove screws securing the coil assemblies to ignition control module.
  2. Remove coils from ignition control module. Remove fasteners securing ignition control module assembly to engine. Remove ignition control module from bracket.
  3. To install, reverse removal procedure. Tighten ignition coil screws to specification. See TORQUE SPECIFICATIONS . Connect the spark plug wires to the ignition coils.
scientia non olet · About LEMON Manuals