Maintenance Indicator Reset

RESETTING THE CHANGE OIL SOON LIGHT
Remember, after changing the engine oil, the system must be reset. To reset the system:






1. Remove the cover of the Under Hood Fuse Block (UHFB), which is under the hood.






2. With the ignition key in "RUN" but the engine off, press the red "Oil-Reset" button and hold for 5 seconds.
^ If the "CHANGE OIL SOON" light is flashing, the system is reset. The light will flash for up to 30 seconds or until the ignition is turned off.
^ If the light comes on again and stays on for 30 seconds at the next ignition cycle, it did not reset. You will need to reset the system again.