September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Installation Procedure
- Install the connector body to the control assembly.
Courtesy of GENERAL MOTORS CORP.
- Install the park lock switch to the control assembly.
- Insert the shift lock control solenoid electrical terminals into the connector body.
Courtesy of GENERAL MOTORS CORP.
- Install the automatic transaxle control assembly. Refer to Shift Control Replacement
in Automatic Transaxle - 4T40-E/4T45-E
- Enable the SIR system. Refer DISABLING & ACTIVATING AIR BAG SYSTEM
in Air Bag Restraint Systems.