Scan Tool Output Controls
Instrument Panel Cluster (IPC)
| Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
| Lamp Engage Test | Special Functions | The IPC will turn on all lamps. |
ECM - 3.0L (L81) and PCM - 2.2L (L61)
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Fan Control 1 | Fan Controls | The scan tool displays a Commanded State of Off or On. This allows you to communicate with the ECM/PCM and activate or deactivate the cooling fan 1 relay, manually turning the low speed fans On and Off. |
| Fan Control 2 | Fan Controls | The scan tool displays a Commanded State of Off or On. This allows you to communicate with the ECM/PCM and activate or deactivate the cooling fan 2 relay, manually turning the Medium speed fans On and Off. |
| 3 Speed Fan | Fan Controls | The scan tool displays a Commanded State of Increase or Decrease. This allows you to communicate with the ECM/PCM and cycle through all three fan speeds, Low, Medium and High. |