LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2003 >> VUE L4-2.2L VIN D >> Repair and Diagnosis >> Transmission and Drivetrain >> Continuously Variable Transmission/Transaxle >> Control Module >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Control Module: Service and Repair


TRANSAXLE CONTROL MODULE (TCM)

REMOVAL
1. Turn ignition Off.
2. Disconnect JI and J2 transaxle control module electrical connectors.





3. Pull retaining tang from the transaxle control module and rotate the transaxle control module up. Remove the transaxle control module from transaxle control module bracket.

INSTALLATION
1. Install transaxle control module.
2. Connect JI and J2 transaxle control module electrical connectors.

IMPORTANT: DTC P0602 is set with all service transaxle control modules. When the transaxle control module is reprogrammed with the correct software and calibrations, DTC P0602 will be erased.

3. Reprogram the transaxle control module with the correct calibration. Programming and Relearning
scientia non olet · About LEMON Manuals