LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2004 >> Ion 1 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Instrument Panel Center Support Bracket Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Ion Red Line, 2007 Saturn Ion 3, and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Center Support Bracket
    GM877820Courtesy of GENERAL MOTORS CORP.
  1. Pull back the carpet and position the center support bracket into position.
    2. NOTE: Refer to Fastener Notice .
  2. Install the center support bracket nuts.

    Tighten:  Tighten the center support bracket nuts to 10 N.m (88 lb in).

    3. Fig 2: View Of Wiring Harness Center Support Bracket
    GM877821Courtesy of GENERAL MOTORS CORP.
  3. Install the wiring harness rosebud to the center support bracket.
  4. Install the front floor console. Refer to Front Floor Console Replacement .
scientia non olet · About LEMON Manuals