LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Cable Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Connect the cruise control cable to the accelerator pedal.
    2. Fig 1: Locating Cruise Control Cable
    GM854297Courtesy of GENERAL MOTORS CORP.
  2. Connect the cruise control cable (2) to the cruise control module ribbon (4).
    3. Fig 2: Connecting Cruise Control Cable To Module Ribbon
    GM325857Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The ribbon must not be twisted.
  3. Insert the cruise control cable into the cruise control module until the seal touches the module.
    4. Fig 3: Identifying Twisted Ribbon
    GM293672Courtesy of GENERAL MOTORS CORP.
  4. Position the narrow cable tab into the narrow slot and the wide tab into the wide slot.
    5. Fig 4: Aligning Cruise Control Cable
    GM329483Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The adjuster tab must be pointing toward the front of the car after installation.
  5. Connect the cruise control cable to the cruise control module by turning the cable clockwise.
scientia non olet · About LEMON Manuals