LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> Brakes >> Antilock Brake System And Traction Control System >> Repair Instructions >> Electronic Brake Control Module Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

  1. Turn the ignition switch to the OFF position.
  2. Clean the electronic brake control module (EBCM) to brake pressure modulator valve (BPMV) area of any accumulated dirt and foreign material.
  3. Disconnect the electrical connector from the EBCM.
    4. Fig 1: View Of EBCM Electrical Connector
    GM890987Courtesy of GENERAL MOTORS CORP.
  4. Remove the 4 EBCM-to-BPMV retaining bolts (1).
    5. Fig 2: View Of EBCM-To-BPMV Retaining Bolts
    GM891773Courtesy of GENERAL MOTORS CORP.
  5. Separate the EBCM (1) from the BPMV (2) by carefully pulling apart.
    6. Fig 3: View Of EBCM & BPMV
    GM891775Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals