Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Ion Red Line, 2007 Saturn Ion 3, and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Disengaging Lamp Assembly Back Plate

Courtesy of GENERAL MOTORS CORP.

Position the reading lamp back plate on the headliner.
Turn the back plate until the tabs engage.
Connect the electrical harness.

Fig 2: View Of Reading Lamp Cover

Courtesy of GENERAL MOTORS CORP.

Slide the lamp assembly cover forward to engage the hooks.

Fig 3: Reading Lamp Cover

Courtesy of GENERAL MOTORS CORP.

Push up on the rearward end of the cover in order to seat the cover clips.
Install the headliner. Refer to Headlining Trim Panel Replacement (w/o Sunroof) or Headlining Trim Panel Replacement (with Sunroof) .
Enable the SIR system. Refer to SIR Disabling and Enabling .