Installation Procedure
WARNING: This page is about a different car, the 2007 Saturn Ion Red Line, 2007 Saturn Ion 3, and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the antenna lead-in to the antenna base.
- Install the antenna base.
- Install the screws to the bracket on the antenna base.
Tighten: Tighten the screws to 10 N.m (89 lb in).
- Install the antenna mast to the antenna base by turning clockwise.
Tighten: Tighten the mast to 10 N.m (89 lb in).
- Install the front fender. Refer to Fender Replacement - Front (Coupe) or Fender Replacement - Front (Sedan) .
NOTE:
Refer to FASTENER NOTICE
.